| 型號Model | Unit | 150规格表 |
射出系統 | 螺杆直徑Screw Diameter | mm | 26 |
射出壓力Injection pressure | kg/cm² | 1183 |
理論射出容量Theorfical Shot Volume | cm³ | 55.7 |
射出量(PS)Max.shot Weight(PS) | g/0z | 50/1.7 |
射出率Injection Rate | cm²/see | 34.6 |
螺杆行程Screw stroke | mm | 105 |
螺杆轉速Screw Speed Max | rpm | 0-215 |
射嘴接觸力Nonzzle Contactforce | tf | - |
射嘴行程Nonzzle Retraction Stroke | mm | - |
溫度控制段數Number of temperature Contorl | | 2 |
鎖模系統 | 鎖模力Clampieng Force | tf | 15 |
模板尺寸Plateu Size | mm | 450*280 |
模柱間距Disitance Betqeen Tie Bare | mm | 265 |
最小模厚Min.Mold Height | mm | 100/25 |
開模行程Oprening Stroke | mm | 190 |
最大開模距Max.Mold Height | mm | 290/215 |
頂出力量Ejector Stroke | tf | 1.3 |
頂出行程Ejector Strke | mn | 35 |
油壓電力系統 | 最大液壓壓力Max.Hydaulic Pressure | kg/cm² | 140 |
泵浦葉出量Pump Output | l/min | 17.5 |
作動油量Oil Resservoir Capacity | l | 80 |
冷却水用量Cooling Water Cousumption | l | 400-600 |
馬達電力Pump Motor Power | kw | 2.2(3HP) |
電熱容量Borrl Heating Power | kw | 1.8 |
總用電量Total Weight | kw | 4.2 |
其它 | 機器總重Machine Weight | kg | 850 |
機器外型尺寸Machine Dimensious(LsWsH) | m | 1.35X0.92X2.06 |
裝箱重量Shipping Weight | kg | 1000 |
裝箱尺寸Shipping Dimensious(LsWsH) | m | 1.6X1.0X2.23 |